romzas
11.01.2016, 14:05
В продаже усилитель с бодрым американским звуком JL Audio E4300, качественной корейской сборки, в отличнейшем состоянии, без ремонтов и т.п. Характеристики
4-channel car amplifier
70 watts RMS x 4 at 4 ohms (110 watts RMS x 4 at 2 ohms) at 14.4 volts
45 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) at 12.5 volts
220 watts RMS x 2 at 14.4 volts (150 watts RMS x 2 at 12.5 volts) at 4 ohms
differential-balanced inputs
Advanced Rollback Protection System
variable high- and low-pass filter (50-200 Hz, 12 dB/octave)
switchable bass boost (0, 6 dB at 48 Hz)
optional wired remote bass boost
Absolute Symmetry™ Class-AB amplifier design
MOSFET power and output stages
preamp-level inputs
speaker-level input with optional converter (http://www.crutchfield.com/S-AtRdGKQv2Na/Product/Item/Main.aspx?I=136XDCLR2S)
preamp outputs
4-gauge power and ground leads and a 40-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 40-amp in-line fuse between the distribution block and the amplifier is recommended
14-3/16"W x 2-1/2"H x 9-5/16"D
http://www.12v-club.ru/articles/2/3896/index.html
Фото на днях.
Цена всего 165$ связь через ЛС или 0955770509 Роман.
4-channel car amplifier
70 watts RMS x 4 at 4 ohms (110 watts RMS x 4 at 2 ohms) at 14.4 volts
45 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) at 12.5 volts
220 watts RMS x 2 at 14.4 volts (150 watts RMS x 2 at 12.5 volts) at 4 ohms
differential-balanced inputs
Advanced Rollback Protection System
variable high- and low-pass filter (50-200 Hz, 12 dB/octave)
switchable bass boost (0, 6 dB at 48 Hz)
optional wired remote bass boost
Absolute Symmetry™ Class-AB amplifier design
MOSFET power and output stages
preamp-level inputs
speaker-level input with optional converter (http://www.crutchfield.com/S-AtRdGKQv2Na/Product/Item/Main.aspx?I=136XDCLR2S)
preamp outputs
4-gauge power and ground leads and a 40-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 40-amp in-line fuse between the distribution block and the amplifier is recommended
14-3/16"W x 2-1/2"H x 9-5/16"D
http://www.12v-club.ru/articles/2/3896/index.html
Фото на днях.
Цена всего 165$ связь через ЛС или 0955770509 Роман.